Magnetics should never be used on cars, trucks or vans that have custom paint jobs or aftermarket finishes such as airbrushing or vinyl wrapping. Automotive paint takes a minimum of 90 days to cure clear coat a minimum of 60 days. Make sure to completely dry your sign's front side and magnetic side and the vehicle surface after cleaning.īe sure all surface paints, clear coats and waxes are fully cured or hardened - this is very important.It is recommended that all magnetically adherable signs be removed, inspected, and cleaned after every major rain or snowfall event.Weekly removal and cleaning of the vehicle helps avoid magnetic polarization of the vehicle’s surfaces under the sign.Daily cleaning is recommended when magnetically adhered on vehicles-new vehicles in particular-to help protect the vehicle's clear coat, base coat and other paint finishes. Weekly cleaning is recommended when attached to surfaces other than vehicles.Clean both the sign and metal surface with mild detergent then wipe with a soft cloth or allow both to air‐dry. To help prevent the accumulation of moisture and dirt between the magnet and the metal surface, remove your magnetic signage at regular intervals.Cleaning products like Windex® can help with removing small smudges or stains. The sign's surface may be cleaned with a mild soap and water solution. Remove your magnet signs periodically to help ensure that they may still be securely fastened to the vehicle, and to perform and necessary cleaning.Be careful not to let the magnetic signs overheat or they may stretch. Slight curls in the magnetic material can be removed by placing your magnetic signs onto the flat part of the roof or hood of your vehicle on a warm and sunny day. Never roll your signs tighter than 8 inches in diameter. To avoid cracking or breaking, do not fold or crease your magnetic signs. A great place to store them is stuck to the side of a filing cabinet or refrigerator. Once removed, store in a cool dry place - rolled out completely flat on a 100% flat surface with nothing under or on top of the signs - always store your magnetic signs flat. To prevent uneven paint fading, we recommend periodically removing the sign and leaving the vehicle under direct sunlight for at least 24 hours to ensure an even distribution of UV rays. A generous waxing of both the surface where the signs will be placed and the back of the sign itself (allow 2 days to cure) will help prevent damage. To protect the clear coat/base coat and vinyl surfaces present on some new vehicles, it is recommended that your signs be removed daily. It is important to regularly clean your sign magnets with warm water and a mild detergent, then dry completely with a soft cloth as trapped moisture, dirt or chemicals may harm your vehicle's finish. This helpful information will provide a thorough guide into making sure your magnetic signs last longer, keep your graphics crisp and new, while minimizing wear both to your signs and your vehicle's surface. Welcome to our extended FAQ and information section for customers who use our printed magnetic signs.
0 Comments
Leave a Reply. |